位置:

澳大利亞

類型:

建筑 藝術

材料:

鋁合金

標簽:

Brisbane 布里斯班

分類:

商業建筑 裝置

“光的聲音”是澳大利亞藝術家Alexander Knox為布里斯班喬治大街300號的商業建筑設計的外立面裝置。該裝置以屏墻的形式環繞在三座大樓的底商外沿，為這一即將完工的高端商業綜合體賦予了標志性的外觀。

“The Sound That Light Makes” by Australian artist Alexander Knox forms the exterior screen to the newly developed 300 George Street precinct in Brisbane, Australia. Wrapping around the podium at the base of the three tower site, the work creates an iconic visual signature and landmark for the soon-to-be-completed high-end commercial area.

▼立面概覽，exterior overview

整塊墻面由超過2500塊3D壓制鋁板構成，總面積達到2660平方米。該作品借助幾何形狀與有機形狀探索了閃爍的光線在水面上產生的效果。其三維的金屬表面形態模擬了光在水面上的運動屬性，以此來為布里斯班高度城市化的中央商務區注入自然之力。

Spanning 2660 square metres and comprised of over 2500 3D pressed and planar aluminium panels, the work uses geometric and organic shapes to explore the effect of light shimmering on the surface of water. Its three-dimensional metallic surface is designed to catch and mimic the kinetic nature of light on water, bringing the influence of natural forces into the highly urbanised setting of Brisbane’s CBD. The art fa?ade’s title ‘The Sound That Light Makes’ refers to the shimmer of light on water as a whisper from the sites pre-urban epoch.

▼三維的金屬表面模擬了光在水面上的運動屬性，the three-dimensional metallic surface is designed to catch and mimic the kinetic nature of light on water

▼“光的聲音”由超過2500塊3D壓制鋁板構成，“The Sound That Light Makes” comprised of over 2500 3D pressed and planar aluminium panels

▼入口立面細部，detailed view of the entrance facade

通過使用算法設計工具，藝術家Alexander Knox與他在墨爾本的工作室團隊共同提出了壓制3D激光切割的設計和工藝制作概念。在此基礎上，UAP將Knox的想法付諸實踐，并通過數個步驟使該項作品的制作和安裝得以完成。除了立面之外，UAP在布里斯班的工作室還將負責生產并裝配建筑主入口處的三個立柱（由DBI Design設計）。

Through the use of algorithmic design tools, Knox and his Melbourne studio developed the pressed and 3D laser cut design and artwork concept. Working collaboratively with the artist and developers Multiplex, UAP developed Knox’s design and constructed and installed the artwork in separate phases. In addition to the fa?ade, UAP was also commissioned by Multiplex to develop the three entry columns originally designed by DBI Design, which were designed and fabricated in UAP’s Brisbane studio and workshop.

▼立面的制作是基于壓制3D激光切割工藝而完成的，the fabrication of the facade was based on the pressed and 3D laser cut design and artwork concept